Monday, July 9, 2012

Jetski Sputters and Low RPM?

2002 Honda ARX1200 Aquatrax Jet Ski Sputters and Gives Low RPM


It Starts and runs fine,but in minutes it will sputter and needs to be stopped.

WHAT IS THE CAUSE OF THIS PROBLEM?

One common problem noticed on this model Honda jet-ski is dirty connectors.
In the front of the engine under where the seat clips you will find 2 large multi wire plugs, inspect both of these plugs for corrosion and make sure when the connectors are plugged in that the wires do in fact insert into the other connector and are not pushed out the back of the plug. Those connectors are a common problem with that ski.In most of such cases the connectors are the issue.Disconnecting the wires from this connectors,cleaning the wire terminals and connectors with proper contact cleaner,then reinserting the wires properly to there respective connectors helps/

IF THAT IS NOT THE CASE THEN?

Then in most of such cases you get FI/light buzzer warning indication.
This indicates that there error codes stored in the system.
You will have to retrieve the error codes.Those error codes will tell you whats the issue is.

To retrieve error codes manually try this simple procedure ,jump the service check connector to get the stored codes.

This details will help.
Thanks.

Related help solution:----

How to remove Flywheel on Jet ski?

http://www.howtorepairguide.com/2012/07/how-to-remove-flywheel-on-jet-ski.html

No comments:

Post a Comment